Labels

BASS (50) COMPRESSION (32) DRUMS (45) EFFECTS (49) EQUALIZATION (30) GUITAR (112) HOME RECORDING (95) IMPULSES (21) INTERVIEWS (19) KARAOKE (1) LIVE (10) MASTERING (61) MIDI (21) MIXING (179) REVIEWS (156) SAMPLES (69) SONGWRITING (19) SYNTH (3) VOCALS (31)

Saturday, December 11, 2021

How to use Ping Pong delay to give a sense of depth to a sound

 



Hello and welcome to this week's article!

Today we're going to talk about an interesting, creative use of delay (click here for a dedicated article): the ping pong effect, in a particular way used by some producer to add a nice sense of depth to a tone, especially vocals, but it can also be used on guitars (for example a clean arpeggio or a solo).

Let's start with the definition: a Ping Pong delay is a type of delay that sends the repetitions of a signal on the right and left side alternatively, like it's a ping pong ball.

In order to do this we are going to need a stereo delay plugin (often there is one also bundled directly in our DAW), and usually the interface of this type of plugin features controls to dial specific settings for each channel. 

Instead of using it as a normal stereo delay with ping pong effect (the same type of delay that bounces from left to right), we can add a more 3d effect by using a different time signature between the left and right channel, so that the sound does not bounce back and forth evenly (this is a technique used for example by The Edge, the guitarist of U2):

- we can try to set the repetitions of our vocal track in triplets on one side and in quadruplets on the other, using the same tempo.

- we can try to offset the repetitions by setting for example the time signature in 3/16th of note on one side and 1/8th of note on the other.

- we can try (but this is slightly more risky in terms of result) to detach the sync with the project tempo and set the 2 sides at 2 different bpm.

Any solution we choose, since the result can be easily messy/overwhelming, it's a good practice to filter out some low end, maybe to effect only the tone from 800hz/1khz up, and to not overdo with the mix knob: just a little amount goes a long way, we want to add a 3d effect, not to overshadow the main vocal track.

I hope this was helpful!


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

Saturday, December 4, 2021

NaLex Ampex review (free VST plugin with video sample)

 




Hello and welcome to this week's article!

Today we're going to review a new free guitar and bass amp simulator which is produced by NaLex and which incorporates the models of their other single VST plugins in one: the Amplex!

This plugin is defined by the producer as "guitar tube multiamp", and it recreates a head composed by a preamp section, with gain and eq, and a power amp section, with "power amp" (which is the power amp level control, and even if increased mantains the output volume constant), presence and resonance.

Besides these basic controls the particularity of this plugin is the fact that it can load presets (and comes with many presets bundled), each one of which corresponds to a particular guitar amp (for example the rhythm channel of a 5150, the clean channel of a Fender Twin, or the overdrive channel of an Ampeg bass amp).

Here is the list of the amps simulated, and for each one of them there are usually two or more presets, each one recreating a channel (for example clean and overdrive):


2120 is Peavey 5150 style
Barbarian is Engl Savage style
Bass is Ampeg SVT style
Citrus CR120 is Orange OR120 style
Crunchman is Friedman BE-100 style
Firecube is Engl Fireball style
Four is Diezel VH4 style
Gerbert III is Diezel Herbert CH-3 style
Hell is Randall Satan style
Hot Dog is BadCat Hot Cat style
J800 is Marshall JCM800 style
J800 Lead is Marshall JCM800 Lead Series style
Ketchup is Tomato style
Magic is Crate BV style
Pectifier is Mesa Rectifier style
Revolt is Krank Revolution style
SV is Carvin Legacy style
Twin Clean is Fender Twin style
Uber is Bogner Ubershall style
ZLO is Soldano SLO style


I'm really surprised of how good this amp sim sounds, especially considering that it's free: it is versatile, sounds very realistic, honestly I don't see differences with most of the paid amp simulators on the market (obvioustly excluding the 2 or 3 cutting edge high end ones) and also stable, even if it's not the lightest on the cpu, when loaded on a stereo buss.

I suggest all of you to check it out, it might just be what you were looking for, especially for rock and metal, but there are enough models here to get good tones also for any other genre.


Thumbs up!


Specs taken from the website:


- Controls:

- Gain - input level knob

- Bass - tone knob

- Middle - tone knob

- Treble - tone knob

- Power Amp - power amp level knob (level stabilized input/output)

- Low End - tone knob (resonance)

- Presence - tone knob

- Volume - output level knob

Saturday, November 27, 2021

How guitar amp, stompbox and cabinet simulators affect the harmonics of a tone

 



Hello everyone and welcome to this week's article!


Today's topic has been suggested me by my friend Carlo from Ignite Amps, and it involves using a spectrum analysis tool to see the changes that occur in our tone with the various types of plugin that can be used in our guitar chain.

The first picture, the one on top, is a sine wave generated from Presonus Studio One, the most neutral sound I could come up with, and in this second image we can see what happens if we pass it through an overdrive (the Ignite Tyrant Screamer, the settings of all the plugins are at noon): you can see the solid state style distortion produced, which creates harmonics in a regular, repetitive way.




In this third picture we see our sine wave passing through a tube power amp simulator (the Ignite TPA-1), notice that the harmonic increase is not as dramatic as per the overdrive, but this addition makes the tone warmer and fuller thanks to the tube emulation.




In the fourth picture, the one below, you can see what happens if we pass our sine wave through a preamp, the Ignite NRR-1; here we can see a more noticeable change, especially in the high end.




In this fourth picture you can see the result of summing up the overdrive, the preamp and the power amp: the harmonics add up, and if you look closely for example you can see graphically the overdrive ones and the preamp ones.




Finally one of the most important steps, which once again changes dramatically the tone: the cabinet simulator (in this case Lancaster Audio Pulse, using its stock IR):  the change is significant, because the IR applies its own EQ curve, in this case lowering the high end and gives the tone its final touch in order to sound realistic.




Obviously I have used a sine wave because it's easier to show graphically, if you will repeat this experiment using your guitar tone it will look different, but I have made this article to focus on two things: the importance of a power amp, compared to when someone puts a virtual preamp directly into a cabinet simulator, and to show how drastic are the changes performed by the cabinet simulator.

I hope this helps!

Saturday, September 19, 2020

Review: DiMarzio Blaze neck 7


Hello everyone and welcome to this week's article!
Today we're reviewing the neck version of the original 7 strings pickup: the DiMarzio Blaze!
The first mass produced 7 strings guitar was the Ibanez Universe 7, a revolutionary guitar designed by the guitar hero Steve Vai, which adapted to the electric guitar version the extended range possibilities offered from a low B string, already experimented in some avant garde classical guitar.

The first pickup that came with the Universe 7 was the Blaze 7, in bridge and neck position: the bridge version was rumored to be a modified version of the Steve Special, while the neck one is a medium output pickup which sounds like an overwould PAF, with a particular eq.

The eq curve is scooped compared to a PAF pickup, because the neck position of a 7 strings guitar can sound extremely muddy, so the designers removed some mid range leaving a strong low end and a cutting high end for clarity, this makes the pickup a very balanced choice for the neck position, and it's still today loved by Steve Vai, Herman Li of Dragonforce, James McIlroy from Cradle of Filth and it has been used for decades also by Korn.

The pickup has a distinctive tone which is very suited for metal solos, because it cuts through the mix very well and doesn't have that excessive high end typical of solos done with a bridge pickup, and the fact that still today it is considered a well established standard is a proof of its quality.

I suggest everyone to try it, also because compared to other brand pickups the price is not bad, you will not be disappointed.

Thumbs up!  


Specs taken from the website:


- Recommended For: All positions

- Quick Connect: No

- Wiring: 4 Conductor

- Magnet: Ceramic

- Resistance: 15.8 Kohm

- Year of Introduction: 1990

- Output: 280

Saturday, September 12, 2020

Ep, Demo, Single, Lp, Full Lenght, Mixtape, Split, live album, box sets, what are they?



Hello and welcome to this week's article!

Today we are going to see a small glossary with the definitions of words that often are used in the music environment but that not always are so easy to explain: here's your cheatsheet.


Demo: a self produced record to be used for promotional purposes, which can have any number of tracks, but on average it features 2 to 4 songs. 

Single: a recording of 1 to 3 tracks, with a runtime of less than 10 minutes which contains the main song and one or more B sides. It was very popular in the past, as it was used for radio airplay purposes. Today the concept of single is more tied to the release of a video in the streaming platforms.

EP: it means "extended play", and it usually features 4 to 6 tracks, with a runtime of less than 30 minutes.

LP/Full Lenght Album: "long play" is referred usually to vinyl records, "full lenght" is for the other supports, and it features any number of tracks, with a runtime longer than 30 minutes (but there can be also exceptions, for example Slayer's Reign in Blood is an LP that lasts 28 minutes).

Split: it could be, according to the duration, either an EP or a Full Lenght, but it consists into two or more bands putting their songs together in the same record in order to split the production and distribution expenses and to promote themselves to each other's audience. If there is a different artist for each song, that it's a Compilation.

Mixtape: a serie of recordings (it doesn't matter the number of tracks) usually released for free for promotional purposes, which does not necessarily contain only original material but also covers, remixes, B-sides and so on (for some reason mixtapes are used mainly in rap and hip-hop though).

Live album: the recording of a live performance, usually of songs previously released in studio version.

Greatest Hits/Box sets: collections of previously released songs, usually united with some rare or unreleased bonus material, such as medleys, a cappella versions, alternate lyric versions, live, covers, acoustic version, remixes and so on.


I hope this was helpful!


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

Saturday, September 5, 2020

Review: Zoom MRT-3 Rhythmtrak



Hello and welcome to this week's article!

Today we're going to review another legacy product, which came out the same time as the Zoom MRS-4 (in 2003 click here to read the review): The Zoom MRT-3 Rhythmtrak.

This is a very portable MIDI drum sampler which can be powered either by batteries or by DC plug, and it offers 7 pressure-sensitive pads, 199 sounds and 396 patterns divided in many genres, from jazz to reggae, from hip hop to heavy metal.

Today all these drum modules/samplers are more or less computer based, meaning that they somehow offer a way to plug them to the pc to use also the computer samples, and they are used more as an interface to play in real time, since it is basically an instrument, but back then, when still not every studio had a PC, these sequencers were very popular because, as the name says, they would let you create loops with the integrated sounds (either by writing them or by playing them real time) and put them in sequence in order to create the song you needed, then they were synced via MIDI to the tempo of the song by connecting them to the audio workstation (or to a digital master clock, which was an external rack unit that would set the tempo for all the other devices connected).

Once all the sounds are chosen (either pre-made kits or custom ones, to which also the velocity can be adjusted), all the loops are selected and put in sequence, not only this device lets us play the song, but it let us also improvise in real time by playing with the pads during the playback, and our performance can be either recorded or not. 

What to say about this device? I have never seen so much functions packed in such a small device, and back then it was quite a breakthrough (plus the samples were decent sounding and fit for every genre), but today it's quite useless due to the lack of connections with a pc (except the MIDI one), and because with DAWs these tools are used only to play with the samples in real time, all the other functions have become rather obsolete and clunky.

I wouldn't suggest to buy it today unless you're vintage lovers, but nevertheless thumbs up for the technological content back then, it was quite impressive.


Specs taken from the manual:


● 199 16 bit-48khz drum and percussion sounds, 396 preset patterns contain a wide variety of preprogrammed rhythms. 99 additional patterns can be programmed and stored by the user.

● Create a backing sequence (song) with up to 99 patterns. As many as 99 such songs can be stored for immediate use at any time.

● Internally lit pads let you follow the rhythm pattern visually during song playback or when using a pattern. 

● Choose up to 14 sounds from the built-in drum and percussion sources, and then adjust level, tuning, and panning individually to create your very own drum kit. 

● Optional foot switch FS01 allows pattern start/stop control or tempo switching. You can also operate an assigned sound such as bass drum or open/closed hihat.

● MIDI IN connector allows use with an external MIDI sequencer or other device. The Multitrak Recording Studio ZOOM MRS-4 is an ideal match, letting you synchronize the audio tracks from the recorder with the rhythm track from the MRT-3. Playing the sounds of the MRT-3 with an external MIDI component is also possible.

Saturday, August 29, 2020

A-side and B-side in albums and singles


Hello and welcome to this week's article!

Today we're going to elaborate more on our songwriting articles specifying something about the perfect composition of a tracklist (click here for the original article), as my friend Zoltan suggested.

A-sides and B-sides are a thing of the past: they come from a time in which the physical support for music came with 2 sides (vinyls and cassettes) because there wasn't enough room to store one whole album all in one side.

Why is this relevant still today? Because, historically, quoting Wikipedia: "The A-side usually featured the recording that the artist, producer, or record company intended to receive the initial promotional effort and radio airplay, to hopefully become a hit record". Basically the producers wanted the radio hosts to listen to the best songs first, and then, only if they wanted, to deepen the knowledge of the artist by flipping the side and listening to the other material.

This rule applied mostly when talking to singles: the artist would relase a single, which is a record with the main song to be promoted for radio and tv airplay, and on the flipside there would be another song or two considered by the label as "less catchy" but usually part of the same recording session.

When talking about full lenght records instead the situation is slightly different: it's true that usually the album presents its best shots in the first side, but the second side, which usually contains the same amount of songs, needs to be perceived with similar dynamics: it wouldn't have sense to put 5 fast songs in the a-side and 5 slow ballads in the b-side, the b-side needs to have some good song too, and a good mix in dynamics to keep the listener engaged until the end.

One final mention goes to the rare "double A side", a single in which both sides are considered to be the song to be promoted (for example in the case of Queen's Bycicle Race/Fat Bottomed Girls single).

Today, in an age in which the concept of "side" doesn't have meaning anymore, we say "B-side" to refer to something that the artist or the label consider secundary, and it's usually some bonus songs like live versions, alternate versions, demo versions and so on, which are used to enrich certain particular editions of a record.



Become fan of this blog on Facebook! Share it and contact us to collaborate!!