Labels

BASS (42) COMPRESSION (28) DRUMS (39) EFFECTS (41) EQUALIZATION (24) GUITAR (91) HOME RECORDING (65) INTERVIEWS (18) LIVE (9) MASTERING (43) MIDI (16) MIXING (140) REVIEWS (85) SAMPLES (23) SONGWRITING (11) VOCALS (25)

Saturday, June 23, 2018

Everything you need to know about drum triggers PART 2/2



CLICK HERE FOR PART 1/2


Now that we know the basic concepts behind a drum trigger let's try to understand its practical applications:

- Live environment: a drumset can be triggered entirely (except for the cymbals) or partially (for example just the kick or the kick and the snare) to make the sound cut through the mix better, and send the samples from the drum module to the mixer.
This way the sound engineer can use the samples and the microphoned drum parts the same way as they were all microphoned, with all the perks of the samples: more clarity, less dynamic range (usually drum modules features also effects like compressor, reverb...), and so on.
As in all environments, it is very important that the hits acquired from the trigger are received correctly from the drum module by setting the sensitivity, and if necessary, adjusting the pressure of the trigger on the drum skin.

- Studio environment: this is the environment in which drum triggers shines the most.
A recording engineer can record a whole drumset both with microphones and triggers, and decide during the mixing phase what part to use natural, what part to use triggered and what part in which to use a blend between microphone and sample (except for cymbals, which is better to keep acoustic because they are the drum part that result more "fake" when sampled).
Here the setup is crucial: the trigger must be placed correctly, not too tight because it would interpret hard hits like double hits, not to loose from the skin because it wouldn't notice the lightest touches, and the sensitivity must be carefully tuned in the drum module.
Once everything is set, the drumset will be recorded both acoustically and in a Midi track in the computer, and the mix engineer will be able to easily edit the Midi by removing doubles, reducing or evening out the dynamic range, quantizing, snapping to grid, "reintroducing humanity", or even rewriting certain parts.
This is very useful if the drummer is not very good and if the microphoned part is so bad that can't be fixed, but also just to add a sample on top of the microphoned drum part, if needed.
Finally, if we don't have triggers, we can always put a sample on top of a microphoned drum part by using a drum replacer.

- Home practice environment: there are electonic drum kits, usually pretty small and foldable like the one depicted in this article, that features skins made to reduce the sound to the minimum to not bother anyone in the house, and these drum parts (included the rubber "cymbals") have a trigger inside of them, so that the drummer can connect them to a drum module and play with the headphones (sometimes also playing along with a song). This is a very useful home solution for those who doesn't have a rehearsals room, the drum parts offers a feeling similar to a real drum skin in terms of "bounce" of the drum sticks and it can be used also for recording drum parts.


CLICK HERE FOR PART 1/2


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

No comments:

Post a Comment

LinkWithin

Related Posts Plugin for WordPress, Blogger...