Labels

BASS (50) COMPRESSION (32) DRUMS (45) EFFECTS (49) EQUALIZATION (30) GUITAR (112) HOME RECORDING (95) IMPULSES (21) INTERVIEWS (19) KARAOKE (1) LIVE (10) MASTERING (61) MIDI (21) MIXING (179) REVIEWS (156) SAMPLES (69) SONGWRITING (19) SYNTH (3) VOCALS (31)

Saturday, October 24, 2015

Recording and mixing using Reference Tracks! (a guide for dummies)



Hello and welcome to this week's article!
Today we will talk about a little trick that everyone uses (also the pros) to improve our ear and to check out if our mix is going in the right direction: using a reference track while mixing.
What does it mean?
It means using a track that we "trust", like a song that we consider a perfect mixing and mastering balance, to confront in real time with our project, when mixing it, in order to make sure we nail the right balance and overall tone we are aiming to.
Note that this article is an integration and expansion of our Ear Training, Referencing and Mixing Articles! 

Everybody, when mixing a project, tend to fall in the psychological "trap" that the project sounds good, that everything is well balanced, even if it's not, because our "ear" tends to "accustom" itself to what is hearing, and after a certain amount of time we tend to not notice anymore certain problems, especially eq-wise.
What can we do? Surely one remedy is to stop for some minute every hour or so of mixing, to let our ears rest and reset the "eq-bias" they have accustomed to.
The other method is switching back and forth between our song and a reference track.

The greatest producers in the world (for example Dave Pensado), has an array of songs they trust (for example one song in which there is the best vocal processing, another one in which the drums sounds perfectly balanced and so on), and when mixing they create an empty channel, load those tracks into it, adjust the volume so that it is comparable to the volume of their project and make a/b comparisons all the time, checking out all the most important areas of their mix, to see if it's comparable to the best industry standards in term of overall sound.

The main areas to compare are:

- Balance: How loud are the vocals, or the drums, compared to the rest of the instruments? Are all the instruments sitting properly in the mix? 

- Overall bass amount (this is good for comparisons also in the Mastering Phase): is our song too bass heavy? Or not enough?

- Effects: do our vocals need some more reverb? Or, when comparing them to our reference track they are drowning on it?


We can also use reference tracks in the recording phase: since we know that the starting sound is the 60% of the final sound, we should try to nail a tone as perfect as possible before even starting to work on it in the mixing phase.
This could help us placing the microphones in a certain position while recording a guitar, or in working on the drum sound (both in finding the right tuning configuration or finding the right samples when using them, for example), and so on.
In the Mastering phase using a reference track is interesting to compare the overall loudness, the overall eq (to see if our project is too "dark" or too "bright" compared to the perfectly balanced reference track), and so on.
(just remember, though, that if we put our mastering plugins in the master buss they will affect the reference track channel too!).

As we have seen there are many, many uses and good reasons to use a reference track. It can sound like an extra waste of time, but I assure you that it will bring its results! Let me know if you have tried it, and if it helped you improving your mix!


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

Saturday, October 17, 2015

Review: MXR Wylde Overdrive



Hello and welcome to this week's article! 
Today we are going to speak about one of the most iconic overdrives ever made: the MXR Wylde Overdrive!
The first version of Wylde overdrive was developed by Mxr, a legendary stompbox brand, which later was acquired by Jim Dunlop, so today the actual name of the latest version of this pedal is Jim Dunlop Berzerker Overdrive, but besides the different name the hardware part is identical.

When designing this pedal Zakk Wylde, the guitarist of a good part of the Ozzy Osbourne solo career and singer and guitarist of Black Label Society, he took as a base a Boss SD-1 (Super Overdrive) and made his own tweaks, increasing the gain and making it true bypass, while keeping the same controls: Tone, Gain and Output (which in the original Boss Sd-1 is called Level). 
The resul is an overdrive that can be used to add warmth and grit to a clean channel, like all the other overdrives, while mantaining a certain level of dynamics, but that is even more suited for its main purpose (the way it's used by Zakk Wylde): to boost the distorted channel of an amplifier to add attack and to scoop the mids, in order to obtain a very aggressive heavy metal tone, Black Label Society or Pantera style. 

How does it compare to a classic Tubescreamer, the most famous booster in the world? 
The Zw44 is brighter (like its Boss original overdrive) and more aggressive, and when pushed it can acquire a character which sounds almost like a fuzz, in terms of gain style. This gives to the guitarist a wide range of sounds to play with, even if after a few tweaks it becomes clear the true vocation of this stompbox: to be used in a hard rock-heavy metal environment, rather than in a blues/jazzy one, since it is more about giving the player a huge amount of gain rather than the subtlety and the dynamics of the smoothest overdrives on the market.

The final thought is that if you are looking for an overdrive to boost your crunch channel to play heavy metal this stompbox is almost unbeatable, also because it's true bypass, so when turned off it doesn't eat your guitar signal.
If you are looking for a very subtle overdrive that underlines the nuances of your clean playing, instead, maybe is better to look somewhere else.


SPECS Taken from the Jim Dunlop / Mxr Overdrive:

Input Impedance 1 MΩ

Output Impedance 7.5 kΩ

Nominal Input -22 dBV 

Noise Floor* -88 dBV

Bypass Hardwire

Current Draw 2.2 mA

Power Supply 9 volts DC


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

Saturday, October 10, 2015

How to sound like: Jimi Hendrix (with sample and using only free Vst Plugins)



Hello and welcome to this week's article!
Today we are going to see how to obtain very easily one of the most iconic and classic guitar sounds of the history of this instrument: the classic Jimi Hendrix tone.
Let's start by saying that Jimi hendrix was really an innovator: he took effects which were new at the time, like the modulation effects, and made them famous and mainstream, to the point that many of them are still today a standard in any guitar player rig.

Another thing to say about Jimi Hendrix is that he actually had a LOT of tones; almost a different one for each song, to the point that some commercial simulator (for example the very complete Amplitube Hendrix) today recreates the tone of the various single songs.

I wanted to recreate the classic Little Wing sound, that in my opinion is the best one, using only free plugins or the ones bundled in any commercial Daw: as you can see from the picture above (which shows the full chain, to be read from left to right, from top to bottom) I have used Presonus Studio One, but the same rules can be applied to any DAW, since they all feature these processors by default.

First off I have loaded on a track the original Little Wing, to use it as a Reference Track, so I could compare in real time the results of my tweaking, until the sound was similar enough.
I have used my cheap Squier Stratocaster, using the neck pickup (although in the last part of the sample I have switched to the bridge one, which was a humbucker, in order to have a little more output), tuned it, found the right Input Level, and proceeded loading a Preamp to use with the clean channel. I have used the Ignite Amp NRR-1, with no cab emulation (when using clean guitars it's possible to act this way to obtain a more direct sound, it's no blasphemy :D), and I have added enough gain to simulate a booster in front of the amp.
From here I have proceeded to add two modulation effects typical of the Hendrix sound: a Phaser and a Chorus. both of them in a very moderate amount, just to add some depth and character to the sound.
In the end I've put a sprinke of Reverb, do give some space to the sound, that otherwise without Cab emulation would have sounded too direct.

On the bottom of the signal chain I've added a Low pass Filter to shave off some of the harsh frequences typical of the digital sound, and put a limiter on the master bus.


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

Saturday, October 3, 2015

Interview: Adrienne Zolondick



Hello everyone and welcome to this week's article!
Today our good friend Tammy of Moonstruck Promotions is interviewing Adrienne Z, an american pop-rock singer and songwriter, here is the result of out chat with her!



Florida USA musician Adrienne Zolondick (Adrienne Z) was raised in Boston, Ma., in a house filled with music. Her immediate and extended family sang and even her childhood babysitters played guitar and shared songs with Adrienne and her sisters. Adrienne followed her musical heart and attended Walnut Hill School of the Performing Arts in Natick, Massachusetts. “My voice was very young and small back then and I didn't quite understand all that I learned in those four years singing classical music as well as show tunes,” says Adrienne. “I liked to sing along with record and I discovered the expert vocal training I received helped me sing what I was hearing correctly. “I didn't choose to wail and scream like Janis Joplin because I didn't like how it felt in my voice. I preferred a nuanced, emotive type vocal style. It seemed to suit my songwriting,” she says.
Compared to singers like Joni Mitchell, Ricki Lee Jones, Dido and Stevie Nicks, Adrienne's voice is pure emotion, stylistically elegant, soulful, and ethereal.Chameleons is a captivating listen. Songs run the gamut from ballads like “Blue Day”, to all out rockers like “You Push My Love Away” to sweet reflections like “When The Day is Through” complete with a heavenly violin solo.
Adrienne tours steadily in the Florida Keys and is planning a US tour in 2017.


Hi Adrienne! Welcome to Guitar Nerding Blog. We're pretty excited because you are our first female artist feature!

GuitarNerdingBlog: Can you tell us what brand of guitar you play? All guitarists have a wish list of the "perfect" guitar. Can you tell us what sort of guitars are on your wishlist?

AdrienneZ: A couple of years ago I heard about a man named Dean Nickless who lives here in the Keys, Big Pine Key to be exact. I first heard about him when I accidentally put a small whole in my 1944 Martin 000-18 when my guitar strap broke and the bottom of the guitar landed on a rock. I was devastated. Fortunately, I was at the right place at the right time to hear about Dean and his amazing ability with not only fixing guitars,but actually making them. After he fixed the whole in my old Martin, impeccably well I must say, I was thrilled at the job he did, I played one of his guitars that he made himself and learned about many other musicians in the Keys he personally made guitars for to the exact specs that they wanted. I really needed to retire my old Martin, having played it for many years in not always ideal conditions. It doesn't look nearly as bad as Willie Nelsons guitar, but as it was my road guitar for so many years, it certainly looks like it's been played a lot I can tell you that! Lol! I asked Dean if he would make me a guitar to the exact specs of my Martin 000-18 and he did just that. This is my dream guitar and number 12 in the Nickless catalog. He was so meticulous with his measurements, he measured down to the thickness of the varnish on the old girl! He used local Wild Tamarind wood for the back and sides, a Sitka Spruce Bear Claw top, stripped ebony fingerboard and bridge and Cuban Mahogany neck which he describes as, "the only true Mahogany." (He knows a lot about wood and guitars I can tell you that!) This guitar is for my solo, duo or trio shows. I also have a Line 6 variax acoustic guitar which I use when I perform with a band. It is a guitar with a computer inside with 16 different recorded guitar sounds. Everything from a sitar sound to various sized acoustic guitars have been recorded to create the sounds in the line 6. I use this to keep from having issues with feedback in band situations when many monitors are on stage.

On my wishlist? I have to say I'm pretty satisfied right now with my stay at home Martin, and my new Nickless guitar for my live shows. The bass response I am getting with it is unlike anything I have ever heard for a live guitar sound. It's truly a one of a kind and I feel blessed to have it! In fact, every time I see Dean at a show I always ask him, "I can really take this guitar with me? It's really mine?" I kid with him. And he just laughs. He is very humble and I'm happy to share his name with you all.
I am still in awe mode with my Nickless guitar and for recording purposes I like having other stringed instruments like, a ukulele. My wish list right now includes more acoustic instruments: a mandolin, a baritone guitar.



GNB: You mention being a fan of James Taylor's guitar style. Can you tell us a little about your technique (fingerpicking, strumming, do you use a pick)? and guitarists you admire? When did you first start playing guitar. Do you play other instruments?
AZ: I started playing guitar when I was 8 years old, inspired by the babysitters I had actually. :-) Four sisters came to the house to babysit us and they were just in high school. Having both sides of my family into music and a love for singing, I opted to learn guitar in grammar school when other kids were choosing wind instruments or percussion. I like to fingerpick, and strictly fingerpicked for years before getting a pick. As a matter of fact, to this day I am more comfortable with my fingers on the strings than a pick in my hand. I prefer to feel the strings. My technique developed from listening to music and trying to play exactly what I was hearing. I did this a lot with James Taylor, Dan Fogelberg, Nancy Wilson of Heart, Crosby Stills Nash & Young, I also play the piano and use it mainly as a tool to write songs and arrange tunes I'm recording in my studio. I have a bass guitar as well and love to write bass parts to my songs or a song I'm producing.


GNB: Adrienne, do you use outboard gear? Guitar effects? Pedals? Amps?

AZ: I did buy a Fishman Aura after reading about James Taylor using it for his live shows, but I wasn't happy with the sound of it with my Martin. I prefer guitars that sound as close to what you hear un-amplified as possible so as far as my acoustic guitar sound. I prefer it realistic and un-effected.


GNB: Can you tell us about your guitar set up?

AZ: Dean installs KK pickups on all his acoustic guitars, I have been really happy with the sound of my guitar with these pick ups. The volume control clings to the underside of the sound hole via a magnet. I plug straight into my PA. I just purchased a Fishman SA 220 and it's clear as day. I can tell you I was on stage performing in the round with 6 singer songwriters. for a songwriters night playing my brand new Nickless guitar and Steve Spellman, who owned The guitar Shop in Washington DC from 1968- 2011, came up to me after the show and said I had the best sounding guitar on stage. That's a huge compliment coming from a guy who would lend Crosby Stills & Nash his exquisite Martin guitars. Steve Spellman himself had to sit in for Neil Young when he missed his flight at Bill Clinton's birthday party! I just learned Steve has a house here in the Keys. Dean told me he spoke with Steve about making a 000-18 size guitar and he wondered about the bass response Steve reassured him it would be fine, and fine it certainly is.


GNB: You perform a lot in tropical climates. HOW DO YOU KEEP YOUR GUITAR in tune with obvious heat and humidity?

AZ: I have never had an issue with my Martin or my Nickless going out of tune. I keep my guitars in the ac at home with me which keeps them out of the elements most of the time. Even when I take it out to shows where I may be in the sun for an extended period of time, they require very little tuning once I tune it up at the show. I do know a guitarist that keeps 3 guitars outside in his van all the time. I believe his van isn't kept in direct sunlight. He says they're not his high end guitars but he uses them all at his shows and I perform with him and don't recall having to wait too long for him to tune though I am sure he tunes more than I do. :- The guitars are fine... me on the other hand.... I'm sweating way more than my guitar!


GNB: We understand you have a new record out! Tell us about it!

AZ: This record has many different styles and themes. From Nu folk, pop to more of a rockin sound to Americana and even Trop Rock. I was concerned about how all the various styles would pull together actually, It wasn't until I figured out the song order that it occurred to me how well they actually flow into each other from song to song, like a concept record, which I really like. Not even sure there are a whole lot of concept records being made these days.The words and music for Chameleons is an outpouring of emotional songs filled with desperation, feelings of loss and deep sadness that came about from the break up of a long term relationship I had. The great thing about the record is the sadness comes and goes from song to song and transitions to a happier place through the course of the record. Blue Day, When the Wolves Cry and For Your Soul are pure emotional tunes born out of deep sadness. There's the angry love song, "You Push My Love Away", which flows into "Back on the Road", a song that embodies the awareness of how much better it feels to move on, let go and fly. Other songs like Little Bit of You in Me and Twinkletoe Land are love songs. Bringing Some Where There is None, Chameleons and When the Day is Thru all express the desire to make a change and grow, revealing that we have the power to change our situations in the moment. "Dancing in the rain, there is sun again, rainbows in the Moonlight." Feelings of loss are evident for sure on Chameleons but the awareness of change and rebirth, getting back on track and on the right road to enjoying life is where the album takes you. I never would have imagined that all these tunes from different emotional places would work so well, not in my wildest dreams, but they do and I love this record!

Saturday, September 26, 2015

4 Ways to move your guitar sound towards the midrange without equalizing it



Hi everyone and welcome to this week's article!

Today we will speak about alternative ways to push our instruments, especially guitars, into their place inside of a mix without being too drastic with the eq!
The common mistake that a recording newbie does is to start with a bad sounding recorded track, and hoping to fix it in the mix with a drastic eq work, while the truth is that for example boosting strongly a midrange means recontructing digitally certain frequences, and the more we do it, the more it sounds digital and unnatural.

So, how does the pro obtain that sound? 
They surely have great microphones, great preamps, great a/d converters and so on, but most of all they nail the right sound at the source; this is a boring task, but they spend in finding the right amp settings, the right speaker to use and the right mic placement, probably more time than what they spend into shaping the guitar sound while mixing. 

1) They know by the experience how to get into the computer a sound that sounds already as much as possible "ready", and this is the first and most important method I can suggest to move a guitar sound in its place while keeping it natural and not overprocessed: to spend more time in the recording phase, trying ALL the different possibilities we have with the tool that we have, until we find a sound that we feel it can be acceptable even without processing, comparing it constantly with a reference track of our choice. 

2) The second method to emphasize the body of a guitar (but also any other instrument, like a snare or a vocal track, or cymbals) is to saturate it a bit. What do we mean a bit? Less than it becomes noticeable. Usually there is a sweet spot before it becomes too evident, in which you can add some harmonics without changing too evidently the base sound. A great saturation vst is Fabfilter Saturn.

3) A third method, which is sometimes less invasive than saturation, is harmonic excitement. A harmonic exciter add some frequency that makes the sound to pop out more, just watch out because, exactly as it happens with saturation, harmonic excitement must be added with care, avoiding it to become noticeable. A great Harmonic Exciter is the one included in the Izotope Ozone bundle.

4) A fourth and last method is to use a Console Emulation or a Channel Strip. Every piece of hardware in which we let our signal to pass through adds something and takes out something, this is obvious, and some piece of hardware is used specifically for the colour it gives to the tone.
Virtual emulators of these pieces of hardware can help us giving our tone that character that we need, without being too violent: some people just adds them in the vst slot and leaves'em there untouched, just to add their sprinkle of colour. A classic example of Console Emulation vst is Sonimus Satson, while a typical Channel Strip used to colour the sound in a nice way is Waves SSL.

Obviously these four methods will not replace completely an equalization work, but our mindset when approaching a guitar sound should be to record it as it should be perfect without any further processing, then equalizing it just to filter out the unneded-overlapping frequences (so high pass, low pass and some attenuation here and there), and finally just try to use one of these four methods in order to push the sound towards the midrange, if we feel it doesn't have a stable position in the mix yet.


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

Saturday, September 19, 2015

Interview: Onqel of TSE AUDIO




Hello and welcome to this week's interview! 
This time we had a chat with John A. Johansen, a.k.a. Onqel, Ceo/Lead developer of Tse Audio, one of the most interesting guitar and bass amp simulation developer around, which offers top quality free and paid products. He is also one of the most respected users of the Ultimate Metal / Andy Sneap forum, due to his proficiency in the vst developing field.


GuitarNerdingBlog: Hi! Can you give us some detail on how Tse audio was born?

J.A.J.: TSE Audio was born back in 2009 when I decided to take a dive into amp simulations myself.
I wanted a simulation of the Engl E530 since there was no software at that time simulating that kind of amps, and eventually the X30 was born.
It started out as a hobby, and it still is exactly that :)


GNG: What do you think about the digital amp modeling business nowadays?
J.A.J.: I think the digital amp modeling business has come a far way the last 5 years or so, but there's still parts of amp simulations that are considered more or less "impossible" to do in real-time with todays techniques without simplifying the circuit in one way or another.
at the same time I also feel the market has become more or less flooded with "hype" marketing schemes/slogans that I feel doesn't really represent what they actually delivers to their customers in terms of the progress of new technology. It's a shame but it's reality, it's a tough market out there so I guess some people doesn't really care wether or not to put some extra icing on the cake just to make more people taste it.
We have a freeware software background and is a lot more humble in that area I believe. 
We are not afraid to let the customer make their own decisions without us throwing in a pitch how good we think it is, we have a demo version of the X50 and that's it. What you see/hear is what you get! :)





GNG: What does the design and production process of a Tse Plugin is like?

J.A.J.:The X50v2 started out as a IPlug plugin (Cockos Inc.) but as the project got bigger it just got messy and hard to work on, we recently switched to the JUCE framework to make GUI implementations etc easier and more flexible without making it too complex.
We have a fantastic small group of very dedicated beta testers that has sticked with us from the idea is created up to the product is released, even after the product has been released they are hanging around to make sure we don't miss anything when the updates are made :)
The actual modeling process depends on the complexity of the circuit we're looking at, it is mainly analysis of the target circuits and turning them into a set of equations that represents the electrical and
(discrete) dynamic response of the system. in the end the model ends up looking like a SPICE simulator optimized to process oversampled audio signal at fixed time steps.

When we feel the response of the resulting model is meeting our expectations the work is then handed over to our graphics designer.
From that point we are mainly looking for bugs to make sure there are no negative surprises when our customers takes it for a spin at home or in a live/jamming session.


GNG: What is the philosophy behind your software: analog modeling, black box approach or else?

J.A.J.: We do analog modeling wherever it is possible.
So far we haven't needed any black box approach, but if it's absolutely needed to make the job done we are open for it.
Lately I have been interested in checking out the use of Artificial Neural Networks as a MIMO (multi input multi output) approach to replace large lookup tables that can eat up the memory for even smaller circuits. The biggest downside of this approach is that ANNs needs to be "trained" beforehand to know what they should do and that is a very time-consuming process with a lot of trials and errors.


GNG: What have been your career highlights so far?

J.A.J.: My biggest highlight so far has been the release of X50 v2.4 where I finally got the chance to bring back to life the X30 model inside a environment that I had been working on what felt like forever. 
The choice of not exclusively working on freeware projects anymore was also a big decision to make that I had been postponing for a couple of years. 
I'm not excluding the possibility of maybe releasing something free in the future though :)


GNG: What do you think the future of analog and digital amps and stompboxes will look like?

J.A.J.: I think we will see a lot of new software in the next new years as new simulation strategies/technology are developed.
There are many new and original analog amps and stompboxes being made every day by small one-man companies etc and I hope people will continue to support these guys. 
Personally I think it is still cooler to see a man crank up the volume knob on his analog amp rather than seing someone sweeping his fingers over a iPad screen ;)


GNG: The interview is over! Thank you for your time and give us one last message for our readers!

J.A.J.: Thanks for the opportunity to answer your questions! 
I have a message to the readers too :)
When it comes to purchasing new digital software I would highly recommend to get hold of a couple of demo versions of interest and actually compare them against eachother before making a final decision. 
Software is rarely a cheap investment, do what you would do when going to a store to buy a new TV or deciding between a couple of guitars to buy, take a moment to compare them yourself instead of
blindly trusting the salesman, you might have a different opinion than him after a while :) YouTube reviews are also a big business where the smaller companies usually aren't represented simply because of the ridiculous high fees set by the guys doing the reviews that only a big corporation can afford to pay. I think that is unfair to both customers and small businesses and it gives a one-sided view of the (big) market which has a lot more to offer than 2-3 programs.


Monday, September 14, 2015

Review: Direct Sound Extreme Isolation EX-29 Headphones


Hello and welcome to this week's article! 
Today we will talk about headphones, and we will review a very particular type of headphones: the ones whose main purpose is to isolate the sound coming from outside.
Headphones can be used for many purposes, and most of the times they are for listening to something, but not always, or not just that.
Sometimes they are made specifically to isolate the listener from the external sounds (like the headphones used by those who use a jackhammer to not become deaf, or from those who needs to sleep frequently on a plane and wants to cut away the hum of the airplane engine).
There are basically two ways to lower the external noise with headphones: or by using an active technology (with battery powered headphones that takes the external sound with a microphone and creates for the listener an equivalent-off phase one to nullify it) or by using a passive one, which consists into applying certain construction criteria that leads to a significant decibel cut from the external sources.
Today we are taking a look at the Direct Sound Extreme Isolation Ex-29, the top shelf product of this company, which offers, by using a Passive technology, a decibel cut of 29 db.
The main purpose of these headphones is the tracking use: they are great as a monitor for the recording drummer, since there is no spill (so the click will not bleed into the overhead microphones, which is a classic drum tracking problem), and the track will be clear on the ears of the drummer, who will also be able to hear its recorded drum sound in real time.
Another typical use is when you have to to find the sweet spot while microphoning a guitar cab: although these headphones won't be able to completely eliminate the external sound, it will be lowered enough to make you focus on the signal taken from the microphone, and place it more consciously.
In conclusion these headphones do what they promise. the isolation is good enough, especially for tracking drums, and the reproducted sound is not bad at all: obviously it would be a risk to rely on it while mixing or mastering, but considering the price the sound is not bad.
If you own a recording studio, they are an essential tool!


Specs taken from the Direct Sound Website:

Type: Dynamic closed back headphones with closed back drivers
Passive Attenuation: 36.7 dB at 8,000 Hz, NRR 29 dB
Frequency Response: 20-20,000 Hz
Fidelity Response: TruSound tonally accurate
Drivers: 40 mm, closed back
Impedance: 32 Ω
Sensitivity: 114 dB at 1 KHz 1 mW
Cord: 9 ft (2,750 mm) premium twin-lead cable
Plug: Straight stereo 1/8″ (3.5 mm) gold-plated with screw-on 1/4″ (6.3 mm) gold-plated adapter
Rated Input Power: 500 mW
Maximum Input Power: 1,000 mW
IncrediFlex padded, fully adjustable headband
Foldable for storage
Convenient jack adaptor keeper
Made in the USA


Become fan of this blog on Facebook! Share it and contact us to collaborate!!