Labels
BASS
(50)
COMPRESSION
(32)
DRUMS
(45)
EFFECTS
(49)
EQUALIZATION
(30)
GUITAR
(112)
HOME RECORDING
(95)
IMPULSES
(21)
INTERVIEWS
(19)
KARAOKE
(1)
LIVE
(10)
MASTERING
(61)
MIDI
(21)
MIXING
(179)
REVIEWS
(156)
SAMPLES
(69)
SONGWRITING
(19)
SYNTH
(3)
VOCALS
(31)
Saturday, October 28, 2017
Differences between Class A, B, AB, D power amps
Hello and welcome to this week's article,
today we're going to talk about power amps!
This article is to be intended as a follow up to our Tube vs Solid State power amps article.
Let's start off by saying I'm no engineer, I have made some research (I will put at the end of the article my sources), and the aim of the article is just to put in simple terms the differences, acting as a reference article for the simple musician that is not too expert in electronics.
We all have read in the description of a guitar amplifier (or any power amp in general) the definition "Class A", "Class B", "Class A/B", "Class D" and so on, wondering what it means: it is a code to describe the way the power amp works (yes, there are also other classes, but these are the most relevants in sound amplification).
First let's define what is a preamp and what is a power amp: a preamp is the device that boosts microphone and instrument level signals to line level, a power amp is the one that boosts the line level signal strong enough to drive a speaker.
Class A power amps: these were the first tube power amps ever created, the least efficient in terms of power comsumption to output ratio and the simpliest to build; basically the electricity passes thorugh one or more tubes in serie, which operates continuously. It generates a lot of heat and consumes the tubes much faster than the other circuit types, but it has also some particular property, for example it has no crossover nor switchoff distortion, which are typical of Class B power amps. A famous The tonal characteristics of this kind of power amp are a "bluesy" and particularly "musical" tone.
Class B power amps: in these amps there are two or more power tubes, and this configuration conducts the power half of the time in one tube and half of the time in the other (at a very high speed), prolonging the life of the power tubes but generating a very particular distortion, which is typical of many guitar amplifiers cranked to the max. This distortion is called "crossover distortion" because it is generated by the current that, moving from one tube to another alternatively (or from one transistor to another in solid state amps), for a split second in time it is not drawn by neither of the two, thus generating that noise.
As a general rule, Class B power amps grants more headroom, higher volume, better clarity and sparkle than the Class A ones.
Class AB power amps: these kind of amplifiers are very similar to the Class B ones, but the tubes doesn't stop drawing the current before the other one is on, so there is never a moment in time in which for an instant both of them are off. This reduces the amount of crossover noise, and allows to save at the same time some tube life and power comsumption. This system is often used in high-end home sound systems.
Class D power amps: these ones operates with transistors instead of tubes, and this means that they operate on a better power efficiency (less heat is generated, less electricity is wasted) and they work through a system called "pulse width modulation", which means that the sound is divided in many single pulses (measured in hertz), and the "width" of these pulses generates louder or quieter sounds. The "space" between a pulse and another is noise, which needs to be eliminated from the system with a filter, and all this project requires a significantly more complex amount of engineering compared to the tube circuits aforementioned. Class D power amps usually are less expensive than their tube counterparts, but they lack some of the tonal characteristics many guitar players are after (although technology is slowly catching up, and it is very likely that in the near future this differences will be completely nullified), on the other hand they are much more reliable, solid and power efficient.
I hope this was helpful!
Sources:
Cambridge audio Class B and Class AB Amplification
Quora.com
RealhomeRecording.com
Paul Mc Gowan
Electronic Design.com
Electronic Tutorials.ws - Class A Amplifiers
Electronic Tutorials.ws - Amplifier Classes
Become fan of this blog on Facebook! Share it and contact us to collaborate!!
Saturday, October 21, 2017
How to create a radio podcast in 8 steps (a guide for dummies)
Hello and welcome to this week's article!
This time we are going to talk about how to create a radio podcast.
What is a podcast? Think of it as a radio show that instead of listening in real time you download it (or stream it) via Mp3, therefore you can create an archive of episodes that can be listened at any time.
What do you need? Pretty much the same material you need for a home studio:
- a computer with an audio interface
- a digital audio workstation
- a microphone
- a pair of headphones
...and some plugin.
And here's the 8 steps to create a podcast:
1) First off, you load your favourite daw, set up the audio card and the microphone.
2) Now create at least two audio tracks: a mono one which will be your voice and one or more stereo ones (depending on how many background music-songs-jingles you want to reproduce at the same time), and be careful in setting the gain levels.
3) Record your voice parts, for as long as you want in the mono track.
4) Insert in the stereo track(s) some background music, or for example a song or a jingle you want the listeners to hear.
5) Set up a de-esser and a compressor in the mono track to make your voice to come out loud, warm and without excessive dynamic excursion.
6) Set a compressor in Sidechain mode in the stereo track(s), using as trigger the mono track. This way, if you can set it correctly, when you will speak, the music in the stereo track will automatically lower its volume (this effect is called ducking) leaving your voice to come through clearly.
7) When you are satisfied of the content produced you can add a little touch of mastering in the master chain, adding a limiter and a metering tool to make sure it is not overcompressed.
8) The last step is setting the markers at the beginning and the ending of the podcast and exporting the Mp3, possibly in a decent quality like from 192khz up, and share it with the world, keeping in mind that some platform such as Youtube recognize copyrighted material and sometimes blocks it, so be careful.
I hope this was helpful!
Become fan of this blog on Facebook! Share it and contact us to collaborate!!
Saturday, October 14, 2017
Review: Orange Signature #4 Jim Root Terror (with video sample)
Hello and welcome to this week's article!
Today we are checking out the Orange Jim Root Signature Terror!
Jim Root is the guitarist of Slipknot and former Stone Sour, and he has a long tradition in using Orange amps, especially his classic Orange Rockverb 100 MKII.
What Orange did was taking the Dirty channel of the Rockverb and turn it into a small switchable 7-15w high gain tube amp, single channel.
This head is extremely tiny and light (actually it's a half stack), also considering it's a tube amp, but the impressive thing is the volume it can put out, both in 7 and 15 watt mode: way more than enough to rehearse with a drummer.
In terms of tone we have a high gain version of the classic Orange sound: a british sounding, deep growling tone, with the typical low mid chunkiness that can be found in all the amps of the brand: an eq timbre basically opposite to the Marshall one, which is a bit more high-mids oriented.
The ideal genres for this kind of sound are Stoner Rock, Doom, modern hard rock, and if we lower the gain we obtain also a pleasant, warm clean-overdriven tone, without excessive background noise.
As for all low wattage amps the upsides in terms of size and weight have their counterpart in low headroom, less air pushed by the basses and overall a slighly thinner tone than a high wattage amp, but compared to most of the other low watt amps I have tried so far (for example Engl and Mesa Boogie) I have to say that this is probably the loudest one, and the one that gets the closest to a regular 100w head (the only other one with similar characteristics that I have tried so far capable of holding up against this is the Marshall DSL15H Head, which has even more functions).
Overall definitely an amp to check out if you are a musician who likes to travel light but also to have a mean tone!
Thumbs up!
Specs taken from The Website:
- ALL VALVE
- HIGH GAIN 4 STAGE PREAMP
- VALVE FX LOOP
- “ROCKERVERB” TONE STACK
- VALVES:POWER AMP: 2 XEL84
- PREAMP: 3 X ECC83/12AX7
- FX LOOP 1 X ECC81/12AT7
- TOP PANEL (RIGHT TO LEFT):GAIN, BASS, MIDDLE, TREBLE, VOLUME
- OUTPUT POWER:15/7 WATTS SWITCHABLE
- SPEAKER OUTPUTS:1×8 OHM OR 1×16 OHM OR 2×16 OHM
- UNBOXED DIMENSIONS (W X H X D):30.3 × 19 × 15.3CM (11.93 × 7.48 × 6.02″)
- UNBOXED WEIGHT:5.7KG (12.57LB)
Become fan of this blog on Facebook! Share it and contact us to collaborate!!
Saturday, October 7, 2017
Band Pro: WHAT DIRECTION IS MUSIC BUSINESS GOING FOR SMALL UNDERGROUND BANDS?
I’ve been on each side of the barricade. I’ve been a reviewer, a promoter, a musician and I booked some gigs here and there with other people in the last years, so, I know how these worlds work together and how much bands are struggling to reach a good visibility in the underground. The music business is really evolving fast in this decade and the old pillars are going to be destroyed very soon. The full length album is now part of a large and complex chain of distribution. Is the final piece of a long road but it’s not necessary the only part. Today the market says that small releases are better than a large one but no one is saying that to young new bands. Today the market wants more way to listen your music and probably doesn’t care about any physic copy of your piece of art. Today the market is focused on singles and jingles and doesn’t care anymore about eleven tracks on one artists but eleven tracks of eleven artists, just because there are so many good artists out there that the market can’t stay focused on just one single act.

From Billboard.com
The Market is people and if you don’t know people, you don’t know your target, if you are not part of the market your music will be forever out of any context. No one is saying to bands to stop forever doing full album alone. No one is saying to young bands to stop paying facebook for self-promotion. No one is saying to young bands that the 80’s are gone and the world changed so much and so deeply that everything in music has different meanings or values of ten or five years ago.
You can’t emulate the big sharks when you are the smallest fish on the ocean, you’ll be eaten so fast that your death will be painful but definitive.

From Billboard.com
This is why I started Band-Pro. Band-Pro is an environment for bands to grow and learn about music business, how to promote yourself, how to relate with labels and clubs. Band-Pro is all my experience and all my knowledge for band who are struggling to reach an audience that already exists but seems so ethereal. My service is very pragmatic I don’t offer you any sort of number of sales of views, this is a path that We can walk together and the final point depends all by Us.
Edoardo Del Principe
https://www.facebook.com/BandProIT/
Become fan of this blog on Facebook! Share it and contact us to collaborate!!
Saturday, September 30, 2017
5 tips to write a better guitar solo
Hello and welcome to this week's article!
Today we will talk about writing a good guitar solo, using as example some of the most famous ones.
Let's start with some pill of music history: guitar solos had during the 20th century an evolution, that starts with the blues/jazz guitarists of the '20/'30s, in which the improvisation was the key element of the whole performance, evolving in the '50s/'60s with the advent of rock n'roll and becoming more studied, often as a variation for the part of the song in which the audience was supposed to dance, until the '70s and '80s, the golden age of the guitar heroes, in which the solo became the focus of the whole song, often replacing completely to the vocal part.
From the '90s on we have then witnessed a slow decline of the importance of the guitar solo, and today it has become in modern music more of an optional part than a must.
Nevertheless a good instrumental part is fundamental in a song, not only to let the singer to rest for some second but also to introduce a variation element and some depth to the composition, and it doesn't necessarily need to be as technical as Van Halen; what matters is that it has something interesting to say and that it says it in a pleasant way, as for the vocals.
In my article about HOW TO MIX A GUITAR SOLO I have said that it should be treated like a vocal part, and indeed this is the point: it takes the place of the vocal part in that moment, it must become the focus of the listener, therefore it needs to be developed like a lead vocal part.
Here are 5 tips on how to write a better guitar solo:
1) Sing your solo: the first tip is a technique used by several great guitarists, like David Gilmour of Pink Floyd; when he writes a solo he sings it first, so he is sure the melody will be meaningful and effective, and sometimes he sings it live in real time while playing, as it can be heard in some live version of "Wish you were Here". The instrumental part shoul tell a story, like talking: you should start from a point a and getting to a point b, construct the phrase with a pleasant grammar, add something to the conversation: a solo that is not meaningful, if it is just a bored fiddling around the keyboard because it has to be there, doesn't deserves to be listened. A good example of guitar solo that tells a story is November Rain by Guns'n Roses. Singing means also knowing our way on the rhytmical side: we can play with 8ths, 16ths, switching to triplets, changing time signature, anticipate the beat, or (even better) slow the notes slightly to lean to the beat, and so on.
2) Don't overdo technically: it's better to know our strong points and stick to them rather than wanting to put in our solo at all costs something we are not good enough to deliver. Better to simplify it and practice more, until we are confident that we can play that part smoothly without looking goofy and ridiculous.
3) Bendings, slides, legatos, vibratos...: these techniques are your friends when developing a solo language, in facts they are some of the tools that expands our expressivity and that differentiate a guitar from the other instruments. Use these tools to make your solo flow richer and more expressive, by adding a benindg that slowly gets to the target note with emphasis (but beware about the pitch!), or by adding to the long notes a nice vibrato that follows the beat of the song or lazily leans to it.
Also, legato and slide are a great way to not having to robotically pick every note, but to make the guitar sing, and a great example about this is Bijoux, by Brian May for Queen.
4) Know your way around your fretboard: let's not fool ourselves, we can have the perfect ear, we can have the perfect melodies in our head, but anyone that says that learning scales puts us into a prison and that we shouldn't do it to let our melodic creativity to flow is just a lazy doofus in search for an excuse to not study. Scales and modes (wich are variations on the scales) are just other tools we need to know to expand our vocabulary. We don't have to know all of them, but indeed choosing some of them and learning them creating muscolar memory in our hand will be extremely useful, especially when improvising. Today there are also several online scale generators, that once we dial in the key of the song and the mode we want to try can suggest us a scale. This can be a very good starting point from where to begin building our solo, or to find the right variation to create interest, for example by adding some exotic scale note in our solo, technique in which Marty Friedman is a master.
Here is some idea for the modes, taken from the Guitar Tricks Forum:
"In metal, the only modes you pretty much need are Aeolian, Dorian, and Phrygian. But here are all of them:
Ionian - The basic major sound. Think 'happy' or 'triumphant'.
Dorian - The all-in-one blues, rock, and metal scale. This one's great for a jam in minor.
Phrygian - The exotic diatonic mode. Sound a little middle-eastern/Egyptian. Used frequently in riffs.
Lydian - The Vai mode. Creates a dreamy atmospere. Very hard to master.
Mixolydian - The Satch mode. Used in acoustic blues a lot, and good for guitar rock instrumentals.
Aeolian - Straight minor; think 'sad' or 'depressing'. Used in classical.
Locrian - Used a lot in metal riffs for that really EVIL feeling. I don't think I've ever heard it in a solo."
5) Mix improvisation with the theme of the instrumental part: all we have written so far can lead to the conclusion that we don't suggest to improvise. This is not true: I love improvisation, as long as it is meaningful, it is tastefully constructed, and probably one of the best ways to master a solo is by mixing some written parts to other improvised, as some of the greatest guitarists in the world has always done (for example the guitarists of Iron Maiden). Anyway there is no fixed rule about this, it's your solo, you decide how much to improvise, how much to write or whether to choose only one of the two solutions!
Enjoy and let us know if you have any other good tipo to write a better guitar solo!
Become fan of this blog on Facebook! Share it and contact us to collaborate!!
Saturday, September 23, 2017
5 tips on how to record a band rehearsal with a smartphone or a tablet
Hello everyone and welcome to this week's article!
Have you ever needed to record your own band's rehearsals but you did not have a recording device ready for the task?
The solution is probably in your pocket.
A smartphone, if used with some criteria, is capable of recording a decent take that can be used later to analyze that riff you were jamming together, or to not forget an idea.
This small guide is for those of you who want to record their jam and doesn't have any periphereal, obviously keeping in mind that the quality of the phone makes a lot of difference, and that the final file will be a single track, usually mono, that will leave us little room for adjustments (although we will surely be able to use an eq to tame some resonance or apply some hi pass or low pass filter).
The main thing, that will make the difference between a muffled, clipping fart and an audible, usable audio take is to get the gain and the positioning right, and this varies on the loudness of the instruments (eg. if there is a drumset or not), and the size and shape of the room.
For the gain staging we will have to do some trial and error: record a take and see if it's clipping, or if it's too low. According to the case we can adjust the input gain or move the phone in another point of the room. For the balance instead is trickier, because we need to find a position that is farther from the louder instruments in order to attenuate them, and closer to the quieter ones, to make them audible.
Don't rush and take your time, you'll probably need to adjust the position of the phone several times before finding the optimal placement.
Here are 5 tips that can be useful when recording with a smartphone:
1) The band must have a balanced mix, as much as possible. this means that the vocals, the guitar and the bass must not cover each other, and none of these must cover the drums or be covered by them. Place yourself somewhere in the room that is at the same distance from all instruments and find out whether any of them needs to be a bit louder or quieter.
2) Put your phone in airplane mode! Any incoming call, vibration, game notification, will ruin the recording.
3) Set the phone on the ground or on a chair, not too high because the higher it is, the more is the chance it will only get the cymbals. We need to attenuate the cymbals, that are usually very loud. Usually the lower we put it, the more emphasis will be on bass and kick drum.
4) If possible, try to find an app in which the input gain is adjustable, so you will be sure the sound will never clip (if it does, just turn the input gain down). Another good feature for a recording app would be to record in Wav, instead of Mp3.
5) If it is impossible to turn down the input volume and the sound is clipping and distorting all the time try to put the phone further away from the sound sources or apply styrofoam/duct tape or other sound obstructing materials in front of the phone's mike, or try to place the phone behind a layer of cloth/a pillow.
Hope this was helpful!
Saturday, September 16, 2017
5 tips on how to set the correct pickup height
Hello everyone and welcome to this week's article!
Today we are going to talk about the last step of our guide on how to make the perfect setup for our guitar, which has other 2 steps before: how to set the guitar action and how to set the string intonation.
Bear in mind that this is not a technical article but more of a pragmatic guide on how to avoid it to be in the absolutely wrong position, rather than to give a fixed, perfect height, because it varies according to the taste of the player.
Let's start with a short recap: a pickup is a magnet that takes the vibration of the strings (or better the movement happening within the magnetic field around it) and turns it into a signal that, once sent to an amplifier, turns into sound.
The more the magnet is near to the strings the louder the signal will be, and therefore it will be more rich, saturated and with more bass frequencies content.
The farther it is from the strings, the more the guitar will sound acoustic, clean, trebly: these are the characteristics of a lower output.
How do we rise or lower the pickup?
By turning the screws on its sides: they touch the wood beneath and allow us to pull the pickup higher or lower. Keep in mind that if you know what you are doing, it can happen that the sound you are looking for is also with the pickup not 100% horizontal (if you want to add some output on a side or lower it on the other), and that some pickups offer also the possibility to adjust the single polepieces one by one.
My suggestion is to do this only when strictly necessary or you will risk to lose the output balance among the strings.
What we are looking after is, when strumming the guitar with a clean sound, a tone that has on its tail a ring, like a slight tremolo/vibrato effect. If we are too close to the string the vibrato will disappear because it will be so fast that it will be inaudible, if we are too far it will be inaudible the same for the opposite reason, so we are aiming to the position in which the ringing is most audible, and this will mean that the sustain is optimal.
Let's see the 5 basic tips on how to set the correct pickup height:
1) Avoid putting the pickup too close to the strings, first off because the strings can end up touching it (it happens especially with the neck pickup: try to play on the higher frets and see if you need to lower it a bit).
2) Another signal that our pickup is too high is when it is so bassy that it sounds muddy. We must lower it in order to increase the definition.
3) Avoid keeping the pickup too low, because the guitar will sound just weak, and the sound will lose its body.
4) The sweet spot lies somewhere in the middle between "too low" and too high, and it is usually found if you strum the guitar with a clean sound: the tail of the sound must ring, like a slight tremolo/vibrato effect. This means the pickup is on the optimal position.
5) This "sweet spot" of point 4 is actually not a spot but a range, and within this range you can move slightly up or down in order to increase or decrease the output until you find the tone you prefer (more clean or more aggressive).
I hope this helps!
Become fan of this blog on Facebook! Share it and contact us to collaborate!!
Subscribe to:
Posts (Atom)





