Saturday, November 26, 2011

THE BATTLE OF THE PODS (comparison)




The Pod Hd Patch for this sample can be downloaded freely! Open the video on Youtube, the link is in the description!


Hello! Somebody asked me to write an article to explain more clearly the differencies between the various Line6 products, if you think that there is some mistake please report it and I'll correct it.

POD 1.0: the first, revolutionary amp modeling simulator, created in 1998, is a milestone in the world of digital sound processors, and set a new standard of digital tone quality, changing the perspective of digital guitar tone: not a stompbox that adds colours to the amplifier, but a digital workstation that simulates itself the sound of other amps. The technology comes from the knowledge accumulated through the two amplifiers created in the previous two years: the combos Axsys and Ax2.

POD 2.0: the most famous. Published in 2001, this device has updated the 1.0 version with newer technologies (32 amp models, plus various effects), and it's still considered by many a standard, though talking about accuracy and harmonical richness it's been already surpassed by many competitors. The pod "classic" has received severeal firmware updates through the years, one of which  very substantial in 2006, to add the floorboard compatibility, and still today its technology is used for the Pocket pod, the Spider Serie, the floor pod/floor pod plus serie, the Flextone serie, and the Hd147 serie. The particularity of the spider (and pocket pod) serie is only in the presence, instead of the base sounds, of numerous presets done by simulating the sound of many famous artists.
This unit works in 16bit and 44khz, which may result limited for today standards, when compared with other units.

POD PRO: a Pod 2.0 in rack version, which adds more input and ouput connections, like the XRL output, and features a 24 bit signal routing, instead of 16. It occupies 2 rack units. 

POD XT: it represents a further evolution of the Pod family, featuring a new and updated hardware and software engine. It contains more amp models, an internal 24 bit routing, and a lcd display which graphically shows the amp-effect chain. It also introduced the concept of downoadable content packs with additional amplifier models and effects, sold separately (for example, fx pack, metal pack...), which expands even further the simulations available, adding more contents. The Pod XT technology is also used on the Flextone III amplifiers, and there is a floorboard version too: the Pod Xt Live.

POD XT PRO: it stands for Pod XT as the Pod Pro stood for the Pod 2.0. It has more outputs, which makes it very useful in the recording studio, especially thanks to an out dedicated to the REAMPING. Clearly there are more simulations and functions too, compared to the "bean" version. It occupies 2 rack units.

POD X3: It's an updated version of Pod XT which uses the same models in terms of software, but adds the possibility to pile up the sound of two different amps for the single guitar signal (for example you can obtain a sound with a Marshall amp and a Mesa Boogie amp layered), thanks to a remarkable hardware upgrade. It features also for the first time some preset specific for bass and voice, expanding the versatility of the unit up to trying to make it a "swiss knife" for the studio, as a multi use preamplifier, and Di-box too. The X3 Live is the floorboard version of this unit.

POD X3 PRO: Is the 2 unit rack version of the Pod X3, like for the other pods.

POD HD (bean, rack, floorboard): It brings even further the Pod Family, thanks to a hardware consisting in an upgraded version of the Pod X3's one, and a completely new software dotation. New amp models (for a total of 22, with the 1.3 firmware update), a better interface and display, presets for vocals and bass like for the Pod X3, and like that unit is possible to connect both vocals and guitar (or bass) on the same Pod at the same time, or using two different amps for a single guitar signal. The rack version features a dedicated out for the Line6 Variax guitar, and severeal other ins and outs.

POD HDX: it's the 2013 upgrade of the Pod Hd. It features more routing options (e.g. a Variax input in all models) and a more powerful processor, since the original Pod Hd had some problem when stacking multiple amplifiers on the chain (memory overload).

I hope I've cleared your doubts through the ocean of the Line6 Pod offers: in the end they're all different generations of technology used for all of the Line6 products of that particular moment (the same that happens for example, in the car industry).


Become fan of this blog on Facebook! Share it and contact us to collaborate!!

5 comments:

  1. ciao, Ato! hai per caso provato il pod HD? pareri?
    il fatto è che ho una mezza idea di prenderlo, i contendenti principali sono pod hd 500, pod hd bean, pod hd pro...
    se possibile cerco la massima versatilità di routing, però se col 500 per dire faccio le stesse cose del pro non sto di certo a spendere una fortuna...

    ReplyDelete
    Replies
    1. comunque mi metto a spulciare i manuali, scoprirò qualcosa..

      Delete
  2. PS: ho scritto prima di sentire il video, che cazzo di suonone che hai tirato fuori!
    come ti sembrano i clean e crunch leggeri?

    ReplyDelete
  3. il sample non è buono, è troppo compresso, devo rifarlo. comunque il pod hd suona bene, nei suoni leggeri meglio che in quelli estremi. io ho il fagiolo, e a parte un numero più limitato di in e out, è identico al pro.

    ReplyDelete
  4. hai fatto la fatiditica prova del pot volume? metti un ampli tipo un marshall jcm con il distorto, scendi un po' col pot del volume e vedi se si pulisce bene...

    ReplyDelete